Click image to view full size image
GOAL: check the insulation and materials quality
500V manual Insulation resistance electronic tester
PRINCIPLE: Apply during a defined time a stable continuous voltage, measure the resulting current in between the two parts under test and check with the Ohmic law that the insulation resistance is higher than the minimum value required by the standard. Generally phase and neutral are shunted and the test is made between those 2 shunted points against the ground point. The DUT is not connected to mains !
TEST CONDITIONS (according to the main standards):
♦ Voltage 500 V DC
♦ Time 1 min
♦ Resistance > 1 Mohm to 10 Mohm
Dwell up time: 0-999.9s
Measurement Speed: 3 meas /sec
Insulation Resistance Basic Accuracy: ±5%
Standards:
EN60065: Voltage :500V DC Threshold: depending on the DUT, 2M, 4M... Time: 1min
EN60204-1: Voltage :500V DC Threshold: 1M Time: no defined
EN60335-1: Voltage :500V DC Threshold: depending on the DUT, 2M, 7M... Time: 1min
EN60598-1: Voltage :500V DC Threshold: 2M Time:1min
EN60950: Voltage :500V DC Threshold: 2M Time: no defined
Excellent performance:
1. Adjust the output voltage automatically
(press the voltage button for 1000V output , pop-up the voltage button for 500V)
2. Discharge after test is finished.
3. The lower-limit resistance of the measured product can be pre-set
Technical Parameters:
FAQ
1.What about your quality?
Each equipment must be carry out 100% examination and test again before shipping
2.What is the MOQ ?
Most instruments support MOQ one set.
3.How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .
4.What is the warranty of the products?
One year ,but we can provide you life long support .
5.What is the package?
Export standard Solid wooden case
6.What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .
7.What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc
8.Can we buy 1 pcs sample testing
Yes, we are glad to send 1pc for quality testing if we have stock of the model you required.
9.How to contact us ?
500V manual Insulation resistance electronic tester
PRINCIPLE: Apply during a defined time a stable continuous voltage, measure the resulting current in between the two parts under test and check with the Ohmic law that the insulation resistance is higher than the minimum value required by the standard. Generally phase and neutral are shunted and the test is made between those 2 shunted points against the ground point. The DUT is not connected to mains !
TEST CONDITIONS (according to the main standards):
♦ Voltage 500 V DC
♦ Time 1 min
♦ Resistance > 1 Mohm to 10 Mohm
Dwell up time: 0-999.9s
Measurement Speed: 3 meas /sec
Insulation Resistance Basic Accuracy: ±5%
Standards:
EN60065: Voltage :500V DC Threshold: depending on the DUT, 2M, 4M... Time: 1min
EN60204-1: Voltage :500V DC Threshold: 1M Time: no defined
EN60335-1: Voltage :500V DC Threshold: depending on the DUT, 2M, 7M... Time: 1min
EN60598-1: Voltage :500V DC Threshold: 2M Time:1min
EN60950: Voltage :500V DC Threshold: 2M Time: no defined
Excellent performance:
1. Adjust the output voltage automatically
(press the voltage button for 1000V output , pop-up the voltage button for 500V)
2. Discharge after test is finished.
3. The lower-limit resistance of the measured product can be pre-set
Technical Parameters:
| Model | CS2676FX | |
| Output voltage (DC) |
Range | 500V/1000V |
| Accuracy | ±(5%+3counts) | |
| Range | Test range | |
| 2MΩ | 200kΩ~2 MΩ ±(5%+2counts) | |
| 20MΩ | 2 MΩ ~20 MΩ ±(5%+2counts) | |
| 200MΩ | 20 MΩ~200MΩ ±(5%+2counts) | |
| 2000MΩ | 200MΩ~1000MΩ ±(5%+2counts) 1000MΩ~2000MΩ ±(7%+2counts) |
|
FAQ
1.What about your quality?
Each equipment must be carry out 100% examination and test again before shipping
2.What is the MOQ ?
Most instruments support MOQ one set.
3.How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .
4.What is the warranty of the products?
One year ,but we can provide you life long support .
5.What is the package?
Export standard Solid wooden case
6.What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .
7.What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc
8.Can we buy 1 pcs sample testing
Yes, we are glad to send 1pc for quality testing if we have stock of the model you required.
9.How to contact us ?
| Address |
Shenzhen Bonad Instrument Co.,Ltd. (Hong Kong Bonad Technology Limited) A301 Hongdu Building , 45 district, Baoan, Shenzhen City, Guangdong Province 518100,China |
| Contact Person | Wendy qiu |
| Telephone# | 86-0755-66608016 |
| Fax# | 86-0755-23721200 |
| Mobile Phone# | +86 13418723413 |
| Working Hours | 8:30~12:00 13:30~18:00 (from Monday to Friday) |